Linear motion

src: i.ytimg.com

Linear motion (also called rectilinear motion) is a one dimensional motion along a straight line, and can therefore be described mathematically using only one spatial dimension. The linear motion can be of two types: uniform linear motion with constant velocity or zero acceleration; non uniform linear motion with variable velocity or non-zero acceleration. The motion of a particle (a point-like object) along a line can be described by its position ${\displaystyle x}$, which varies with ${\displaystyle t}$ (time). An example of linear motion is an athlete running 100m along a straight track.

Linear motion is the most basic of all motion. According to Newton's first law of motion, objects that do not experience any net force will continue to move in a straight line with a constant velocity until they are subjected to a net force. Under everyday circumstances, external forces such as gravity and friction can cause an object to change the direction of its motion, so that its motion cannot be described as linear.

One may compare linear motion to general motion. In general motion, a particle's position and velocity are described by vectors, which have a magnitude and direction. In linear motion, the directions of all the vectors describing the system are equal and constant which means the objects move along the same axis and do not change direction. The analysis of such systems may therefore be simplified by neglecting the direction components of the vectors involved and dealing only with the magnitude.

Neglecting the rotation and other motions of the Earth, an example of linear motion is the ball thrown straight up and falling back straight down.

Video Linear motion

Displacement

The motion in which all the particles of a body move through the same distance in the same time is called translatory motion. There are two types of translatory motions: rectilinear motion; curvilinear motion. Since linear motion is a motion in a single dimension, the distance traveled by an object in particular direction is the same as displacement. The SI unit of displacement is the metre. If ${\displaystyle \,x_{1}}$ is the initial position of an object and ${\displaystyle \,x_{2}}$ is the final position, then mathematically the displacement is given by:

${\displaystyle \Delta x=x_{2}-x_{1}}$

The equivalent of displacement in rotational motion is the angular displacement ${\displaystyle \theta }$ measured in radian. The displacement of an object cannot be greater than the distance because it is also a distance but the shortest one. Consider a person travelling to work daily. Overall displacement when he returns home is zero, since the person ends up back where he started, but the distance travelled is clearly not zero.

Maps Linear motion

Velocity

Velocity = displacement / time. Velocity is defined as the rate of change of displacement with respect to time. The SI unit of velocity is ${\displaystyle ms^{-1}}$ or metre per second.

Average velocity

The average velocity is the ratio of total displacement ${\displaystyle \Delta x}$ taken over time interval ${\displaystyle \Delta t}$. Mathematically, it is given by:

${\displaystyle \mathbf {v_{av}} ={\frac {\Delta x}{\Delta t}}={\frac {x_{2}-x_{1}}{t_{2}-t_{1}}}}$

where:
${\displaystyle t_{1}}$ is the time at which the object was at position ${\displaystyle x_{1}}$
${\displaystyle t_{2}}$ is the time at which the object was at position ${\displaystyle x_{2}}$

Instantaneous velocity

The instantaneous velocity can be found by differentiating the displacement with respect to time.

${\displaystyle \mathbf {v} =\lim _{\Delta t\to 0}{\Delta x \over \Delta t}}$ ${\displaystyle ={\frac {dx}{dt}}}$

Speed

Speed is the absolute value of velocity i.e. speed is always positive. The unit of speed is metre per second. If ${\displaystyle v}$ is the speed then,

${\displaystyle v=\left|\mathbf {v} \right|=\left|{\frac {dx}{dt}}\right|}$

The magnitude of the instantaneous velocity is the instantaneous speed.

src: 4.bp.blogspot.com

Acceleration

Acceleration is defined as the rate of change of velocity with respect to time. Acceleration is the second derivative of displacement i.e. acceleration can be found by differentiating position with respect to time twice or differentiating velocity with respect to time once. The SI unit of acceleration is ${\displaystyle ms^{-2}}$ or metre per second squared.

If ${\displaystyle \mathbf {a_{av}} }$ is the average acceleration and ${\displaystyle \Delta \mathbf {v} =\mathbf {v_{2}} -\mathbf {v_{1}} }$ is the average velocity over the time interval ${\displaystyle \Delta t}$ then mathematically,

${\displaystyle \mathbf {a_{av}} ={\frac {\Delta \mathbf {v} }{\Delta t}}={\frac {\mathbf {v_{2}} -\mathbf {v_{1}} }{t_{2}-t_{1}}}}$

The instantaneous acceleration is the limit of the ratio ${\displaystyle \Delta \mathbf {v} }$ and ${\displaystyle \Delta t}$ as ${\displaystyle \Delta t}$ approaches zero i.e.,

${\displaystyle \mathbf {a} =\lim _{\Delta t\to 0}{\Delta \mathbf {v} \over \Delta t}}$ ${\displaystyle ={\frac {d\mathbf {v} }{dt}}={\frac {d^{2}x}{dt^{2}}}}$

src: www.helixlinear.com

Jerk

The rate of change of acceleration, the third derivative of displacement is known as jerk. The SI unit of jerk is ${\displaystyle ms^{-3}}$. In the UK jerk is also known as jolt.

src: images-na.ssl-images-amazon.com

Jounce

The rate of change of jerk, the fourth derivative of displacement is known as jounce. The SI unit of jounce is ${\displaystyle ms^{-4}}$ which can be pronounced as metres per quartic second.

src: www.robotshop.com

Equations of kinematics

In case of constant acceleration, the four physical quantities acceleration, velocity, time and displacement can be related by using the Equations of motion

${\displaystyle \mathbf {V_{f}} =\mathbf {V_{i}} +\mathbf {a} \mathbf {t} \;\!}$

${\displaystyle \mathbf {d} =\mathbf {V_{i}} \mathbf {t} +{\begin{matrix}{\frac {1}{2}}\end{matrix}}\mathbf {a} \mathbf {t} ^{2}}$

${\displaystyle {\mathbf {V_{f}} }^{2}={\mathbf {V_{i}} }^{2}+2{\mathbf {a} }\mathbf {d} }$

${\displaystyle \mathbf {d} ={\tfrac {1}{2}}\left(\mathbf {V_{f}} +\mathbf {V_{i}} \right)\mathbf {t} }$

here,
${\displaystyle \mathbf {V_{i}} }$ is the initial velocity
${\displaystyle \mathbf {V_{f}} }$ is the final velocity
${\displaystyle \mathbf {a} }$ is the acceleration
${\displaystyle \mathbf {d} }$ is the displacement
${\displaystyle \mathbf {t} }$ is the time

These relationships can be demonstrated graphically. The gradient of a line on a displacement time graph represents the velocity. The gradient of the velocity time graph gives the acceleration while the area under the velocity time graph gives the displacement. The area under an acceleration time graph gives the change in velocity.

src: mms.businesswire.com

Analogy between linear and rotational motion

The following table refers to rotation of a rigid body about a fixed axis: ${\displaystyle \mathbf {s} }$ is arclength, ${\displaystyle \mathbf {r} }$ is the distance from the axis to any point, and ${\displaystyle \mathbf {a} _{\mathbf {t} }}$ is the tangential acceleration, which is the component of the acceleration that is parallel to the motion. In contrast, the centripetal acceleration, ${\displaystyle \mathbf {a} _{\mathbf {c} }=v^{2}/r=\omega ^{2}r}$, is perpendicular to the motion. The component of the force parallel to the motion, or equivalently, perpendicular to the line connecting the point of application to the axis is ${\displaystyle \mathbf {F} _{\perp }}$. The sum is over ${\displaystyle \mathbf {j} \ =1\ \mathbf {to} \ N}$ particles and/or points of application.

The following table shows the analogy in derived SI units:

src: ae01.alicdn.com

See also

• Angular motion
• Centripetal force
• Inertial frame of reference
• Linear actuator
• Linear bearing
• Mechanics of planar particle motion
• Motion graphs and derivatives
• Reciprocating motion
• Rectilinear propagation
• Uniformly accelerated linear motion

src: images-na.ssl-images-amazon.com

References

Further reading

• Resnick, Robert and Halliday, David (1966), Physics, Chapter 3 (Vol I and II, Combined edition), Wiley International Edition, Library of Congress Catalog Card No. 66-11527
• Tipler P.A., Mosca G., "Physics for Scientists and Engineers", Chapter 2 (5th edition), W. H. Freeman and company: New York and Basing stoke, 2003.

External links

Media related to Linear movement at Wikimedia Commons

Source of the article : Wikipedia